ECM J/S ratio (SOJ)

11. Mär 2015
Kostenlose Download
10
Letzte version:
1.0

For ECM, this app is to calculate the J/S ratio for the stand-off jammer situation. In this case, the jammer is at a different location than the target. While the target is in the main beam of the radar antenna, the jammer radiates power into the sidelobes. As an example, for a tracking radar, enter the power in kW antenna gain in dB, and IF bandwidth in MHz.

Paket:
com.eeautocalc.ecmsoj
Entwickler:
Randle C. Sink
Kategorie:
Tools
Größe:
808 KB
Erforderliche android-version::
2.2 oder höher
Alter:
Everyone
Aktualisiert:
11. Mär 2015
Downloads:
1K

Ähnlich

1.0
Fonemixo Pro
2
Talövningarna blir roliga med Fonemixo Pro.
1.0.72
Ordet Kors
3,4K
Är du trött på de gammalmodiga gränssnitten för ordsök?
3.8
All Unit Converter App
78
All in One unit Converter App.
1.2
Rádio RJ FM
8
Rádio Brasileira, localizada no Rio de Janeiro, bairro de Campo Grande.

Apps von Randle C. Sink

1.0
ECM J/S ratio
1
For Electronic Counter Measures this app is used to determine the jammer-to-signal...
1.0
Microwave Skin Depth
1
At microwave frequencies, use the app to determine the skin depths...
1.0
NTSC S/N Ratio
1
For a standard NTSC satellite signal enter baseband video bandwidth in MHz.
1.0
TDMA in Fixed Station Network
1
This app is used to determine the number of voice channels that each earth...
1.0
Earth Station G/T Ratio
4
This app requires users to enter earth station antenna diameter overall...
1.0
Microwave Power Density
21
This app can be used to find the power density in the main beam...
1.0
Earth Antenna Received
39
Knowing the gain of the receiving antenna.
1.0
Radar Range Equation
This app is for finding maximum range for detecting a target using the Radar...
1.0
Equivalent Noise Temperature
To determine the noise figure of a device use the relationship NF= in/ out.
1.0
System Noise Temperature
27
This is the noise model of a receiving antenna.
1.0
Basic Plane Wave Parameters
1
User enters frequency in GHz, Er & Ur.
1.0
Astable 555 Timer
3
Adding a second resistor Rb to the 555 timer and connecting the trigger input...